Assist in products selection

FGAC-T-032A-P-0.0M
22060000033

Charging device outlet for charging electric vehicles (EVs) with alternating current (AC), compatible with national standard AC powered charging device plugs for installation in electric vehicle charging stations (EVSE)

comparison

Products type

Only 4 products can be compared each time. Please select the products you want to replace.

    • Overview
    • Technical data
    • Accessories
    • Certification
    • Business data
    • Download

    Product certification

    Product advantages

    ☑All Degson's vehicle sockets and charging pile power sockets adopt a unified design
    ☑The surface of power and signal contacts are silver-plated
    ☑Certified to IATF 16949:2016
    ☑Ergonomic and easy to operate
    1. 3D model
    2. Environmental conditions
    3. Electrical characteristics
    4. Mechanical properties
    5. Installation
    6. Marking material
    7. Locking device
    8. Lock actuator
    9. Cable
    10. Bag
    11. Temperature Sensor
    12. Environmental Product Compliance
    13. Dimension

    3D model

    Environmental conditions

    Maximum altitude5000m(Above sea level )
    Ambient temperature (operation) - 30 °C ~ 50 °C
    Ambient temperature (storage / transport) - 40 °C ~ 80 °C
    IP classIP54(protection cover)

    Electrical characteristics

    Maximum charge power26KW
    Phase 3
    Power pin quantity5
    Rated current of high-power contacts32
    Power contact rated voltage 440
    Quantity of signal contacts 2
    Signal contact rated current 2
    Signal contact rated voltage 30
    Signal transmission type Pulse width adjustment
    Connection method precautions Crimp connection, cannot be disconnected
    Temperature measurement2x Pt 1000 (DIN EN 60751)

    Mechanical properties

    Insertion/pullout cycle10000
    Insertion force< 100N
    Pull out force < 100N

    Installation

    Available installation locationInstallation in front of the board
    Limit of the installation location Only allow 0 to 90 degrees frontal tilt
    Lock actuator installation location Top center
    Mounting hole diameter 7.00 mm (ø)

    Marking material

    Shell colorblack
    Customization basis Provided according to customer requirements
    Contact surface materialAg
    Marking material Plastic

    Locking device

    Lock type Secured by locking device after insertion

    Lock actuator

    Poles of pluggable connectors 4
    Nominal operating voltage 12V
    Motor possible supply voltage range 9-15.5V
    Lock detection maximum voltage 12V
    Response time ≥0.02S
    Work cycle On:off=0.02S:10S
    Working temperature _40 °C ... 80 °C
    Withstand voltage DC1000V
    Power 32W±10%
    Service life >10000 times without load
    Ambient temperature (operation) _30 °C ... 50 °C
    Cable length 0.3m
    Cable composition 4 x 0.5 mm²

    Cable

    Cable composition 2 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²
    4 x6 mm² + 1 x 10 mm² + 2× 0.75 mm²

    Bag

    colorBlue
    Dimensionø350*100mm

    Temperature Sensor

    StandardDIN EN 60751
    Recommended measured current 1 mA (1 V at 0°C )
    Temperature range _50 °C ... 150 °C
    Temperature coefficient (TCR) 3850 ppm/K
    Long-term stability(maximum R0-Drift) 0.06 % (After 1000 hours at 130°C )
    Shutdown temperature 90 °C Equivalent to Pt 1000 value 1346.5 Ω

    Environmental Product Compliance

    REACHconform
    China RoHSconform

    Dimension

    Depth63.2mm
    Hole diameter 60mm x 60 mm
    Wire length 0m
    0.3 m (Lock the actuator cable)
    width76mm
    Height 115.8mm

    CQC parameters

    Overvoltage category/Degree of pollution III/3
    Rated voltage 440V
    Rated current 32A
    IP class IP54
    Order number 22060000033
    Packing unit 5pcs/box
    Minimum order quantity 5
    Products weight (without packaging) 13.65
    3D
    FGAC-P.stp Download
    CAD Data
    FGAC-T-032A-P-03-0.0M-03A(H).dxf Download
    Data
    FGAC-T-032A-P-03-0.0M-03AH.pdf Download

    Similar products

    Online consultation